How Professionals Dry Water Damaged Concrete Floors

Everything needs to be dried correctly: walls, ceilings, furniture, hardwood floors, but also concrete flooring. However, proper concrete floor water damage repair presents unique challenges. 

When inexperienced contractors dry the walls and materials, concrete floors are often assumed to be dehydrated. Folks then proceed to restore their space and include new floors. Not too soon after, they start to have problems with the new floors and assert it is defective. The real problem is most likely that the concrete was not completely dried if they laid the down new flooring.

Many builders are unaware of this and can create problems for their clients by failing to eliminate excess moisture in the concrete.

The Water-Based Adhesive problem

An issue it is possible to run into with concrete floor water damage is the fact that water-based adhesives won’t cure properly. As water-based adhesives are becoming popular, this is now a larger problem when dealing with restoration.

Since moisture evaporates from the concrete, then the water-based adhesive absorbs it. When the glue absorbs more moisture, then it cannot adhere to the floor properly. Since the glue fails to become repaired, it will soften and proceed. Signs that have happened are blisters or bubbles in certain flooring materials.

After applying the tile, the glue may ooze or flow out over the edges of the joints or seams. People can believe that the flooring material is defective, but the real problem is that the concrete has not been dried properly.

How professionals tender water-damaged concrete flooring

Successfully drying concrete following water damage requires the services of a professional restoration firm. Only when professionals properly dry the concrete can you install new floor coverings.

Listed below are key tools and methods that professionals use:

  • These are either boxes or bubbles of plastic taped to the ground. By trapping the moisture released from the cement in a small space, you can reach the right amount of humidity quicker.
  • Thermo-hygrometers and non-evasive meters are utilized to help determine whether the concrete is hitting the ideal humidity. Since concrete is water-loving, this ideal humidity may often be in the upper 60s. Any reading below 72% is sufficient to install carpet or tile flooring. Wood floors should have readings under 70%. If your flooring still requires more drying, that’s not a problem for a professional water damage restoration firm.
  • Low Water Resistant (LGR) dehumidifiers — those devices lower atmosphere temperature at the moisture-filled area, which helps the dehumidifier remove more moisture from the air that passes through it.
  • Additional drying can be achieved through air movement. Removing the boundary layer from the surface of the concrete also eases drying.

Note that each of the various trades connected with installing floor coverings has generated installment criteria. These standards require the installer to determine that the subfloor (regardless of type) is in a decent condition to permit proper installation of any floor covering.

In case you’ve experienced concrete floor water damage at your house, it’s crucial to get hold of restoration professionals, such as PuroClean. We have the right tools to wash your home’s concrete floors correctly.

We’ll help minimize the loss to prevent further damage. We’ll then offer disaster restoration services to return the home to a pre-loss condition as rapidly as possible. All of PuroClean offices have qualified specialist technicians. They provide the latest state-of-the-science solutions to all or any property damaged from water, fire, smoke, mold, and other disasters. Visit them for more information.

Learn the best way to protect your house from water damage and check out this manual on what to do after enduring storm and water damage.